Home › Questions › Granny square problems
Granny square problems: twisting, gaps and wavy edges
A granny square twists or slants when every round is worked in the same direction, because each round leans a little the same way. Turning the square over at the end of each round evens it out. A gap at the start of a round comes from the beginning chain (ch 3); wavy or cupped squares from too many or too few chains in the corners for your tension.
Causes and fixes
The square twists or slants.
Check: The rounds spiral, and the square looks like a pinwheel.
Fix: Turn the work at the end of each round and work the next round with the other side facing, or, on finished squares, block them, which reduces the slant but rarely removes it. Starting each round in a different corner also spreads the lean.
A gap or a seam at the start of each round.
Check: A column where the rounds begin looks looser than the rest, or the first chain shows.
Fix: Start the round with a standing double crochet instead of ch 3, or slip stitch across to the corner space before you chain up, so the round begins in a corner.
The edges ruffle.
Check: The sides wave and the square will not lie flat.
Fix: Too many stitches or chains for your tension. Use fewer chains in the corners.
The square cups.
Check: The middle pushes up into a bowl.
Fix: Too few chains at the corners. Add a chain at each corner; if your tension is very tight, try a larger hook.
Squares of different sizes.
Check: The squares for one blanket do not line up.
Fix: Your tension changed between sessions. Block all the squares to the same size before you join them, or redo the ones that are far out.
Joining methods
| Method | How it looks | Good for |
|---|---|---|
| Whip stitch | A nearly flat seam | A soft, flat blanket |
| Slip stitch join | A ridge on the front if worked wrong sides together, a flat seam if right sides together | Strong seams |
| Single crochet join | A raised ridge, worked on the right side as a feature | A bold outline in a contrast colour |
| Join as you go | Joined in the last round, no separate seam | Saving the sewing at the end |
Common questions
How many granny squares do I need for a blanket?
Divide the blanket's width by the width of one square, and its length by the same, then multiply. A 50 × 60 in throw of 5 in squares needs 10 × 12 = 120 squares. Measure a blocked square.
What is the best way to join granny squares?
It depends on the look you want. Whip stitch gives a nearly flat seam; slip stitch and single crochet joins worked with wrong sides together give a raised ridge on the front; join-as-you-go attaches each square in its last round, so there is no sewing at the end.
Should I block granny squares before joining?
Yes, if they differ in size or slant. Squares blocked to the same size line up and are much easier to join.
Still not sure what is going on? The YarnPath app will look at a photo of your work and tell you which of these it is. About the app →
Updated 8 November 2026.